Inquiry / Contact
igus® Canada

180 Bass Pro Mills Drive

Vaughan

Ontario L4K 5W4

+1 905 7608448
+1 905 7608688

3D print filaments for maximum service life

Up to 50 times more abrasion resistant than standard filaments
iglide® 3D print filaments are special filaments for special requirements. They have lower coefficients of friction than conventional 3D print materials and are suitable for special tasks depending on the material. The offer ranges from 3D print materials for simple processing with very good wear values, and filaments with very good friction properties, high strength and elongation, up to chemically resistant materials and those that are suitable for additive production processes according to the "fused layer manufacturing" (FDM/FFF). You can directly install printed parts such as plain bearings or worm gears and put them to industrial use – in the prototype phase or in serial production.

Products

Filter

Application Requirements
Certifications and approvals
Material

Number of products: 8

iglide® I150-PF, filament for 3D printing
  • The easiest to process tribo-filament
  • High abrasion resistance at low surface speeds 
  • Good mechanical properties
  • Cost-effective

Upon request

Shop now
iglide® J260-PF, filament for 3D printing
  • Good liquid media resistance
  • Wear-resistant, especially when used with plastic shafts

from 64.00 USD / Pc.

Shop now
iglide® I170-PF, filament for 3D printing
  • Best wear behaviour of the Tribo-Filaments
  • Higher processing demands

from 38.33 USD / Pc.

Shop now
iglide® C210-PF, filament for 3D printing
  • Suitable for additive production processes according to the "strand-laying method" (FDM / FFF)

Upon request

Shop now
iglidur® RW370-PF, 3D print filament
  • Flame-retardant, according to UL94-V0 and DIN EN 45545
  • Flexural strength 91MPa
  • High wear resistance
  • Can be processed with high temperature 3D printer
  • Max. application temperature: +170°C
  • Available as 3D printing material (Ø 1.75mm), bar stock and injection-moulding material

Upon request

Shop now
iglidur® J350-PF, filament for 3D printing
  • High wear resistance
  • Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) 
  • Lubrication-free and maintenance-free
  • Higher temperature resistance up to 180°C (continuous) 
  • High-quality processing: suitable for experts

Upon request

Shop now