Inquiry / Contact
igus® Canada

180 Bass Pro Mills Drive

Vaughan

Ontario L4K 5W4

+1 905 7608448
+1 905 7608688

Products

Filter

Application Requirements
Certifications and approvals
Material

Number of products: 27

iglide® J200, round bar
  • Very long service life with hard anodised aluminium
  • Low coefficients of friction
  • Low wear
  • For low to medium loads
  • Lubrication and maintenance-free
  • 30-70 mm diameter

Upon request

Shop now
iglide® J260, round bar
  • Very good coefficient of friction for low or medium loads
  • Good media resistance
  • Long service life – even on polymer shafts and in other special cases
  • Self-lubricating and maintenance-free
  • 30-60 mm diameter

from 83.07 USD / m

Shop now
iglide® J4, round bar
  • Self-lubricating and maintenance-free
  • Low-cost material for mass production
  • Low coefficients of friction
  • Good media resistance
  • Low moisture absorption
  • 15-100 mm diameter

from 22.00 USD / m

Shop now
iglide® J3, round bar
  • Specialist for pivoting and pulsating loads
  • Good media resistance
  • Low moisture absorption
  • PTFE-free
  • 10-60 mm diameter

from 18.69 USD / m

Shop now
iglide® JB, round bar
  • Low wear
  • Low coefficient of friction
  • Low humidity absorption
  • Good media resistance
  • 20-60 mm diameter

from 57.85 USD / m

Shop now
iglide® A350, round bar
  • For temperatures up to +350 °F
  • FDA compliant
  • For medium to high loads
  • Suitable for both oscillating and rotating applications
  • Fulfills the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Self-lubricating and maintenance-free
  • 10-100 mm diameter

from 38.02 USD / m

Shop now
iglide® A160, round bar
  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • High media resistance
  • self lubricating and maintenance-free

from 36.00 USD / m

Shop now
iglide® A500, round bar
  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • Temperature resistant from -100 °C to +250 °C
  • High chemical resistance
  • 10-80 mm diameter

from 69.71 USD / m

Shop now
iglide® J350, round bar
  • Excellent coefficient of friction against steel
  • Continuous service temperature up to +350°F
  • For medium to high loads
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Particularly well-suited to rotating movements
  • 15-100 mm diameter

from 75.36 USD / m

Shop now
iglide® HSD350, round bar
  • Sterilisable
  • For continuous use up to +180° C
  • High media resistance
  • Corrosion-free
  • For wet environments
  • self-lubricating and maintenance-free
  • 30-40 mm diameter

from 234.22 USD / m

Shop now
iglide® H1, round bar
  • High wear resistance in extreme ambient conditions
  • Very low coefficients of friction
  • High resistance to temperature and chemicals
  • For underbonnet applications
  • Lubrication and maintenance-free
  • 30-50 mm diameter

from 196.62 USD / m

Shop now
iglide® J2, round bar
  • Good mechanical properties, robust
  • Cost-effective
  • Good media resistance
  • Self-lubricating and maintenance-free
  • 30 mm diameter

from 146.97 USD / m

Shop now
iglide® M250, round bar
  • Excellent vibration dampening
  • Resistant to edge loads
  • High impact resistance
  • 10-60 mm diameter

from 28.82 USD / m

Shop now
iglide® J, round bar
  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption
  • 10-100 mm diameter

from 10.30 USD / m

Shop now
iglide® L280, round bar
  • For a long service life during continuous operation
  • Low coefficient of friction
  • Extremely high abrasion resistance
  • Suitable for rugged and stainless-steel shafts
  • Dirt-resistant
  • 20-80 mm diameter
     

Upon request

Shop now