180 Bass Pro Mills Drive
Concord
Ontario L4K 0G9
Trapezoidal or high helix spindle
Threaded drive spindle with ball bearing
Rail extrusion with high profile form factor, extremely torsion resistant
High stability
Low cost and 100% self-lubricating
| Ordering number | Stroke length | Max. rotation speed |
max.stat. Load capacity | |||
|---|---|---|---|---|---|---|
| [mm] | [rpm] | axial [N] | radial [N] | |||
| SAW-0630 | 300 | 1000 | 100 | 400 | 286.02 USD | |
| SAW-0660 | 300 | 100 | 400 | 281.45 USD | ||
| SAW-1040 | 500 | 1500 | 500 | 2000 | 245.10 USD | |
| SAW-1080 | 750 | 0 | 750 | 2000 | 408.42 USD | |
| SAW-1080-PL | 750 | 0 | 750 | 2000 | 399.06 USD | |
| SAW-1660 | 750 | 1500 | 750 | 3000 | 438.58 USD | |
| Ordering number | A | Al | H | E1 | E2 | E3 | E5 | E6 | l | lc | hw | f | lt |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| -0,3 | -0,3 | ±0,15 | ±0,15 | ±0,15 | ±0,1 | ||||||||
| SAW-0630 | 54 | 60 | 32 | 40 | 45 | 51 | 51/91 | 23 | 112 | 92 | 30 | 13.5 | 26 |
| SAW-0660 | 85 | 100 | 38 | 71 | 76 | 91 | 156 | 34 | 13.7 | 28 | |||
| SAW-1040 | 74 | 69 | 50 | 60 | 60 | 0 | 56/87/137 | 40 | 129 | 91 | 45 | 22.5 | 30 |
| SAW-1080 | 108 | 100 | 58 | 94 | 94 | 87 | 87 | - | 163 | 131.5 | 49 | 22.5 | 31.5 |
| SAW-1080-PL | 108 | 100 | 58 | 94 | 94 | 87 | 87 | - | 163 | 131.5 | 49 | 22.5 | 31.5 |
| SAW-1660 | 104 | 150 | 78 | 84 | 86 | 132 | 132 | 40 | 220 | 175 | 72 | 38.5 | 35 |
| Ordering number | tk | ts | tg | kt | sk | sg | kg | d | T | ha |
|---|---|---|---|---|---|---|---|---|---|---|
| ±0,1 | Ø | |||||||||
| SAW-0630 | 11 | 6.6 | 20 | 0 | 5 | 10 | 5 | TR8x1.5 | 21.5 | |
| SAW-0660 | 11 | 0 | 20 | 7 | M4 | 2 | 6 | TR8x1.5 | ||
| SAW-1040 | 11 | 6.8 | M8 | 6.4 | 9.5 | M6 | 3.5 | 10 | TR10x2 | 35.5 |
| SAW-1080 | 11 | 6.8 | M8 | 18 | 9.5 | M6 | 3.5 | 10 | Ø10 | 37.5 |
| SAW-1080-PL | 11 | 6.8 | M8 | 18 | 9.5 | M6 | 3.5 | 10 | Ø10 | 37.5 |
| SAW-1660 | 15 | 9 | M10 | 8.6 | 11 | M8 | 5.5 | 16 | TR14x4 | 59 |
