Stage lighting truss systems, low-cost zig-zag e-chain®

Light and cost-effective stage truss

All the advantages of an e-chain® with an innovative guide concept for travels of up to 10m. The system was developed for use on different shaft end supports and is based on DIN EN 17206 and 17206 as well as DGUV Principle 315-390. The current system length amounts to 2.16m. Different chain widths are possible, inner widths from 75 to 150mm are available. Customized separations in the energy chain allow for better cable guidance.

Technical properties
Travel: up to 10m, with a system length of 2.16m
Additional load: up to 8kg/m
Available inner widths: 75mm/150mm
Bend radius: 63mm
Fastening: On 1-, 2-, 4-point shaft end support, with TÜV-approved clamps
Noise: quiet lowering due to plastic chain
Chain guidance: secure guiding system in all directions

Shop Now

Tech up

Allows for higher payload - with up to 30% weight reduction compared to the standard zig-zag

Cost down

Price reduced by up to 30% compared to standard zig-zag

Proof

Developed following DIN EN 17206 and DGUV Principle 315-390

Sustainability

Material and component-optimized design

Vertical chain hoists in stage rigging

White Paper:

Vertical chain hoists in stage rigging

Like every industry, stage technology has its own requirements regarding machine parts and materials. In this white paper, we would like to give you six tips for selecting and designing vertical energy supply systems for stage technology

Download free white paper