Change Language :

Assembly Instructions for energy chain System E6

Assembling

System E6 Assembly

Position side links, gently twist

System E6 Assembly

snap in

System E6 Assembly

Gently reinsert connector by using hammer

System E6 Assembly

Position crossbars, push down and snap in

Separating

System E6 Assembly

Lever crossbars with screwdriver

System E6 Assembly

Tap gently to remove connectors

System E6 Assembly

Twist

System E6 Assembly

separate side links

Assembling lids - E-Tubes

System E6 Assembly

Opening: Insert lid

System E6 Assembly

Closing: Push down and snap in

System E6 Assembly

Lever with screwdriver

System E6 Assembly

and remove lids by hand

Assembly instructions for energy chain System E6-1

mont_E61_01

Remove the opening cross bars by hand or screw driver. Repeat the process on the lower side

mont_E61_02

Disassemble a total of 2 opening cross bars on each side to complete the separation

System E6 Assembly

Push the connection pin out using a screw driver. Repeat the process on the opposing side

System E6 Assembly

Rotate the Energy Chains apart until the interlocks between the chain links disengage. Repeat the process on the opposing side

Contact Us

Questions or product information? Please contact:

scott parker
Scott Parker

Director of Sales

(548) 885-2078Contact an Expert

Customer Service

Customer Service:
Phone: Monday to Friday from 8 am - 5 pm
LiveChat: 24 hours

Book a Call
Book an Appointment with a Product Expert