Shop flange bearings

Find the right flange bearing from igus for your application quickly and easily in our shop for plastic bushings.

Enter dimensions, environmental parameters and other operating conditions in the filter: you will receive an overview of suitable igus catalogue items and customized flanged bearings with immediate price indication.

You will also be shown the service life of our maintenance-free flanged bearings based on your information.

Sleeve bearings (S)
Flange bearings (F)
Clearance-free preloaded sleeve bearings (VS)
Clearance-free preloaded flange bearings (VF)
Thrust washers (T)
Polysorb disc springs (TE)
Wear rings (PR)
Clip bearings - double flange (C)
Clip bearings - single flange (Y)
Clip bearings - single flange with anti-rotation key (Y-K)
Easy clips (EC)
Clip-in double flanged bearings (D)
Flange bearings, pressed in and fold down (K)
Two-bolt flange bearings (FL)
Pre-loaded two-bolt flange bearings (VFL)
Flanged bearing and felt seal (FSG)

Search and configuration
By entering geometry data, suitable plain bearings can be found or individually configured as special parts.
Note: Without complete geometry data, the search only takes place in the catalogue parts. Special parts and their service life can only be calculated and displayed once all the necessary geometry data has been entered in full.
Metricimperial
Inner diameter (d1)
mm
Outer diameter (d2)
mm
Flange diameter (d3)
mm
Bearing width (b1)
mm
Flange thickness (b2)
mm

The igus service life promise:
igus® SE & Co. KG grants purchasers of motion plastics products with an igus service life calculation a guarantee of up to 4 years from delivery. This applies to the calculated number of movement cycles or service hours according to the igus online service life calculator. With this guarantee, igus offers free replacement within the specified guarantee periods from the date of handover (delivery ex works): Guarantee of up to 4 years on igus products
Metricimperial
igus-icon-infoThis setting only affects the calculation of the service life. All other units follow the unit system defined in "Dimensions".
Environment
Environmentigus-icon-info-circle-gray
dry
Temperatureigus-icon-info-circle-gray
23 °C
Bearing load
N
Permitted wear
mm
Shaft material
Case Hardened Steel / AISI 1050
Type of operation
Movement time per hour
min
Type of movement
Speedigus-icon-info-circle-gray
r/min
igus-icon-close-crossRestore defaults

Choose from 1980 suitable offers

Quantity

(0 active)

Filter products

Temperature range

°C

Food sectorFDA complianceEU 10/2011

EnvironmentDirt/dustLow moisture absorptionChemicalsUnderwater / splash water

Electrical propertiesElectrically conductive

Surface pressure

MPa

Quantity

iglide® UW160

UW160FM-0304-05

Injection molding

USD 0.49 / pc.

Delivery time:

2 Days

Service life:

743 h

Dimensions:

3.00

4.50

7.50

5.00

0.75

iglide® A290

A290FM-0405-06

Injection molding

USD 0.50 / pc.

Delivery time:

2 Days

Service life:

Upon request

Dimensions:

4.00

5.50

9.50

6.00

0.75

iglide® R

RFM-0405-04

Injection molding

USD 0.50 / pc.

Delivery time:

2 Days

Service life:

25,757 h

Dimensions:

4.00

5.50

9.50

4.00

0.75

iglide® UW160

UW160FM-0405-06

Injection molding

USD 0.50 / pc.

Delivery time:

25 Days

Service life:

18,665 h

Dimensions:

4.00

5.50

9.50

6.00

0.75

iglide® G1

G1FM-0810-05

Injection molding

USD 0.51 / pc.

Delivery time:

25 Days

Service life:

32,336 h

Dimensions:

8.00

10.00

15.00

5.50

1.00

iglide® G1

G1FM-0608-04

Injection molding

USD 0.52 / pc.

Delivery time:

2 Days

Service life:

21,721 h

Dimensions:

6.00

8.00

12.00

4.00

1.00

iglide® G1

G1FM-0810-07

Injection molding

USD 0.53 / pc.

Delivery time:

Upon request

Service life:

47,220 h

Dimensions:

8.00

10.00

15.00

7.50

1.00

iglide® G1

G1FM-0608-08

Injection molding

USD 0.55 / pc.

Delivery time:

2 Days

Service life:

47,827 h

Dimensions:

6.00

8.00

12.00

8.00

1.00

iglide® UW160

UW160FM-0507-07

Injection molding

USD 0.55 / pc.

Delivery time:

2 Days

Service life:

22,898 h

Dimensions:

5.00

7.00

11.00

7.00

1.00

iglide® R

RFM-0507-05

Injection molding

USD 0.56 / pc.

Delivery time:

2 Days

Service life:

33,023 h

Dimensions:

5.00

7.00

11.00

5.00

1.00

iglide® G1

G1FM-1012-09

Injection molding

USD 0.58 / pc.

Delivery time:

25 Days

Service life:

62,172 h

Dimensions:

10.00

12.00

18.00

9.00

1.00

iglide® GV0

GV0FM-0810-10

Injection molding

USD 0.58 / pc.

Delivery time:

2 Days

Service life:

15,790 h

Dimensions:

8.00

10.00

15.00

10.00

1.00

iglide® G1

G1FM-1012-10

Injection molding

USD 0.59 / pc.

Delivery time:

2 Days

Service life:

69,080 h

Dimensions:

10.00

12.00

18.00

10.00

1.00

iglide® A290

A290FM-0507-05

Injection molding

USD 0.60 / pc.

Delivery time:

2 Days

Service life:

Upon request

Dimensions:

5.00

7.00

11.00

5.00

1.00

iglide® G1

G1FM-1012-07

Injection molding

USD 0.60 / pc.

Delivery time:

2 Days

Service life:

46,115 h

Dimensions:

10.00

12.00

18.00

7.00

1.00

iglide® GV0

GV0FM-0608-06

Injection molding

USD 0.60 / pc.

Delivery time:

2 Days

Service life:

9,155 h

Dimensions:

6.00

8.00

12.00

6.00

1.00

iglide® M250

MFM-0103-02

Injection molding

USD 0.60 / pc.

Delivery time:

2 Days

Service life:

2,288 h

Dimensions:

1.00

3.00

5.00

2.00

1.00

iglide® M250

MFM-0104-02

Injection molding

USD 0.60 / pc.

Delivery time:

2 Days

Service life:

3,482 h

Dimensions:

1.50

4.00

6.00

2.00

1.00

iglide® G1

G1FM-1012-17

Injection molding

USD 0.61 / pc.

Delivery time:

25 Days

Service life:

117,436 h

Dimensions:

10.00

12.00

18.00

17.00

1.00

iglide® G1

G1FM-1012-12

Injection molding

USD 0.63 / pc.

Delivery time:

2 Days

Service life:

82,896 h

Dimensions:

10.00

12.00

18.00

12.00

1.00

iglide® G

GFM-0507-11

Injection molding

USD 0.63 / pc.

Delivery time:

2 Days

Service life:

39,974 h

Dimensions:

5.00

7.00

11.00

1.00

iglide® G

GFM-101115-03

Injection molding

USD 0.64 / pc.

Delivery time:

2 Days

Service life:

8,121 h

Dimensions:

10.00

11.00

15.00

3.00

0.50

iglide® A180

A180FM-0608-04

Injection molding

USD 0.66 / pc.

Delivery time:

25 Days

Service life:

20,302 h

Dimensions:

6.00

8.00

12.00

4.00

1.00

iglide® A180

A180FM-0608-06

Injection molding

USD 0.66 / pc.

Delivery time:

2 Days

Service life:

24,462 h

Dimensions:

6.00

8.00

12.00

6.00

1.00

iglide® G

GFM-0708-017

Injection molding

USD 0.67 / pc.

Delivery time:

2 Days

Service life:

3,473 h

Dimensions:

7.00

8.00

12.00

1.70

0.50

iglide® M250

MFM-0205-03

Injection molding

USD 0.67 / pc.

Delivery time:

2 Days

Service life:

7,384 h

Dimensions:

2.00

5.00

8.00

3.00

1.50

iglide® M250

MFM-0206-03

Injection molding

USD 0.67 / pc.

Delivery time:

2 Days

Service life:

5,937 h

Dimensions:

2.50

6.00

9.00

3.00

1.50

iglide® M250

MFM-0306-04

Injection molding

USD 0.67 / pc.

Delivery time:

2 Days

Service life:

6,147 h

Dimensions:

3.00

6.00

9.00

4.00

1.50

iglide® R

RFM-0810-05

Injection molding

USD 0.67 / pc.

Delivery time:

2 Days

Service life:

28,422 h

Dimensions:

8.00

10.00

15.00

5.00

1.00

iglide® R

RFM-0810-10

Injection molding

USD 0.67 / pc.

Delivery time:

2 Days

Service life:

41,449 h

Dimensions:

8.00

10.00

15.00

10.00

1.00

Material igus-icon-arrow-table-sorting	Dimensions (mm) igus-icon-chevron-left d1 igus-icon-arrow-table-sorting d2 igus-icon-arrow-table-sorting d3 igus-icon-arrow-table-sorting b1 igus-icon-arrow-table-sorting b2 igus-icon-arrow-table-sorting igus-icon-chevron-right	Delivery time igus-icon-arrow-table-sorting	Service life igus-icon-info-circle-gray igus-icon-arrow-table-sorting	Price / pc. igus-icon-arrow-table-sorting	igus-icon-check-box-outline-blank
Material igus-icon-arrow-table-sorting	Dimensions (mm) igus-icon-chevron-left d1 igus-icon-arrow-table-sorting d2 igus-icon-arrow-table-sorting d3 igus-icon-arrow-table-sorting b1 igus-icon-arrow-table-sorting b2 igus-icon-arrow-table-sorting igus-icon-chevron-right	Delivery time / Service life igus-icon-info-circle-gray igus-icon-arrow-table-sorting		Price / pc. igus-icon-arrow-table-sorting	igus-icon-check-box-outline-blank
iglide® UW160 UW160FM-0304-05 Injection molding	3.00 4.50 7.50 5.00 0.75	2 Days	2 Days / 743 h		743 h	USD 0.49
iglide® A290 A290FM-0405-06 Injection molding	4.00 5.50 9.50 6.00 0.75	2 Days	2 Days / Upon request		Upon request	USD 0.50
iglide® R RFM-0405-04 Injection molding	4.00 5.50 9.50 4.00 0.75	2 Days	2 Days / 25,757 h		25,757 h	USD 0.50
iglide® UW160 UW160FM-0405-06 Injection molding	4.00 5.50 9.50 6.00 0.75	25 Days	25 Days / 18,665 h		18,665 h	USD 0.50
iglide® G1 G1FM-0810-05 Injection molding	8.00 10.00 15.00 5.50 1.00	25 Days	25 Days / 32,336 h		32,336 h	USD 0.51
iglide® G1 G1FM-0608-04 Injection molding	6.00 8.00 12.00 4.00 1.00	2 Days	2 Days / 21,721 h		21,721 h	USD 0.52
iglide® G1 G1FM-0810-07 Injection molding	8.00 10.00 15.00 7.50 1.00	Upon request	Upon request / 47,220 h		47,220 h	USD 0.53
iglide® G1 G1FM-0608-08 Injection molding	6.00 8.00 12.00 8.00 1.00	2 Days	2 Days / 47,827 h		47,827 h	USD 0.55
iglide® UW160 UW160FM-0507-07 Injection molding	5.00 7.00 11.00 7.00 1.00	2 Days	2 Days / 22,898 h		22,898 h	USD 0.55
iglide® R RFM-0507-05 Injection molding	5.00 7.00 11.00 5.00 1.00	2 Days	2 Days / 33,023 h		33,023 h	USD 0.56
iglide® G1 G1FM-1012-09 Injection molding	10.00 12.00 18.00 9.00 1.00	25 Days	25 Days / 62,172 h		62,172 h	USD 0.58
iglide® GV0 GV0FM-0810-10 Injection molding	8.00 10.00 15.00 10.00 1.00	2 Days	2 Days / 15,790 h		15,790 h	USD 0.58
iglide® G1 G1FM-1012-10 Injection molding	10.00 12.00 18.00 10.00 1.00	2 Days	2 Days / 69,080 h		69,080 h	USD 0.59
iglide® A290 A290FM-0507-05 Injection molding	5.00 7.00 11.00 5.00 1.00	2 Days	2 Days / Upon request		Upon request	USD 0.60
iglide® G1 G1FM-1012-07 Injection molding	10.00 12.00 18.00 7.00 1.00	2 Days	2 Days / 46,115 h		46,115 h	USD 0.60
iglide® GV0 GV0FM-0608-06 Injection molding	6.00 8.00 12.00 6.00 1.00	2 Days	2 Days / 9,155 h		9,155 h	USD 0.60
iglide® M250 MFM-0103-02 Injection molding	1.00 3.00 5.00 2.00 1.00	2 Days	2 Days / 2,288 h		2,288 h	USD 0.60
iglide® M250 MFM-0104-02 Injection molding	1.50 4.00 6.00 2.00 1.00	2 Days	2 Days / 3,482 h		3,482 h	USD 0.60
iglide® G1 G1FM-1012-17 Injection molding	10.00 12.00 18.00 17.00 1.00	25 Days	25 Days / 117,436 h		117,436 h	USD 0.61
iglide® G1 G1FM-1012-12 Injection molding	10.00 12.00 18.00 12.00 1.00	2 Days	2 Days / 82,896 h		82,896 h	USD 0.63
iglide® G GFM-0507-11 Injection molding	5.00 7.00 11.00 11.00 1.00	2 Days	2 Days / 39,974 h		39,974 h	USD 0.63
iglide® G GFM-101115-03 Injection molding	10.00 11.00 15.00 3.00 0.50	2 Days	2 Days / 8,121 h		8,121 h	USD 0.64
iglide® A180 A180FM-0608-04 Injection molding	6.00 8.00 12.00 4.00 1.00	25 Days	25 Days / 20,302 h		20,302 h	USD 0.66
iglide® A180 A180FM-0608-06 Injection molding	6.00 8.00 12.00 6.00 1.00	2 Days	2 Days / 24,462 h		24,462 h	USD 0.66
iglide® G GFM-0708-017 Injection molding	7.00 8.00 12.00 1.70 0.50	2 Days	2 Days / 3,473 h		3,473 h	USD 0.67
iglide® M250 MFM-0205-03 Injection molding	2.00 5.00 8.00 3.00 1.50	2 Days	2 Days / 7,384 h		7,384 h	USD 0.67
iglide® M250 MFM-0206-03 Injection molding	2.50 6.00 9.00 3.00 1.50	2 Days	2 Days / 5,937 h		5,937 h	USD 0.67
iglide® M250 MFM-0306-04 Injection molding	3.00 6.00 9.00 4.00 1.50	2 Days	2 Days / 6,147 h		6,147 h	USD 0.67
iglide® R RFM-0810-05 Injection molding	8.00 10.00 15.00 5.00 1.00	2 Days	2 Days / 28,422 h		28,422 h	USD 0.67
iglide® R RFM-0810-10 Injection molding	8.00 10.00 15.00 10.00 1.00	2 Days	2 Days / 41,449 h		41,449 h	USD 0.67