1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: PFI-0203-03
- Material: iglide® P
- Shape: Flange bearings
- Dimensions:
- d1 0.125 inch
- d2 0.1875 inch
- d3 0.312 inch
- b1 0.1875 inch
- b2 0.032 inch
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for the 96 PFAS substances considered critical for the environment and health using the SQP M1227 test method (LC-MS/MS and GC-MS) and do not contain any substances >0.1% by mass. This category excludes substances from the group of fluoropolymers.
- The cost-effective outdoor all-around performer - No moisture expansion even with high ambient humidity
- Low water absorption
- Low wear rates
- High load capacity
iglidur® P | The cost-effective outdoor all-rounder - No swelling even with high ambient humidity
Due to its thermal stability and low total moisture absorption, iglidur® P is one of the most dimensionally stable all-rounder materials in changing ambient conditions. iglidur® P is recommended for pivoting and rotational movements at medium loads.
Typical application areas
- Mechanical engineering
- Furniture / industrial design
- Solar technology
- Sport, fitness & rehab
- Traffic engineering
When do I use it?
- When low moisture absorption is required
- When a cost-effective material for high pressure loads is required
- When higher precision is required in damp and medium temperatures
When do I not use it?
- When mechanical rework is required
- When maximum wear resistance is required
Unsure if it fits?