- Part number: MFI-0203-02
- Material: iglide® M250
- Shape: Flange bearings
- Dimensions:
- d1 0.125 inch
- d2 0.1875 inch
- d3 0.3125 inch
- b1 0.125 inch
- b2 0.032 inch
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for the 96 PFAS substances considered critical for the environment and health using the SQP M1227 test method (LC-MS/MS and GC-MS) and do not contain any substances >0.1% by mass. This category excludes substances from the group of fluoropolymers.
- The tough all-around performer with excellent vibration dampening
- Excellent vibration dampening
- Resistant to edge loads
- High impact resistance
iglidur® M250 | The robust all-rounder with outstanding vibration dampening
The self-lubricating material iglidur® M250 is particularly characterised by impact resistance, vibration dampening and wear resistance. It proves itself particularly well under stresses where a vibration-dampening function of the material is required, e.g. in sports equipment and packaging machines. As it is also capable of embedding dirt, it is also suitable for agricultural machinery and gardening equipment.
Typical application areas
- Agricultural engineering
- Mechanical engineering
- Furniture / Industrial design
- Textile industry
When to use it?
- When the material is exposed to heavy soiling
- For excellent vibration dampening
- At low to medium speeds
- When mechanical rework is required
- Insensitive to edge pressure
- High impact resistance
- Thick wall thicknesses according to DIN 1850
When not to use it?
- For applications in wet areas
- When very high precision is required
- For very smooth shafts
- When a cost-effective material with maximum wear resistance is required