- Part number: G1FM-0608-04
- Material: iglide® G1
- Shape: Flange bearings
- Dimensions:
- d1 6 mm
- d2 8 mm
- d3 12 mm
- b1 4 mm
- b2 1 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for 96 PFAS substances considered critical for the environment and health. This category excludes substances from the group of fluoropolymers.
- Lasts twice as long even when using high loads
- Up to 25% less wear using low loads
- Long-term service temperature up to +350°F
- Pressfit up to +250°F (iglide® G: up to +170°F)
- Moisture absorption reduced by 50%
iglidur® G1 | The new lubrication-free standard
With iglidur® G1, we offer a wear-resistant and versatile material for a wide range of applications. Applications with medium to high loads at medium speeds are recommended. Even at elevated temperatures up to 180°C, iglidur® G1 is dimensionally stable and wear-resistant and offers very low moisture absorption. This makes iglidur® G1 suitable for a large number of different applications and thus represents an all-rounder with very good running performance.
Typical application areas
- Automotive
- Mechanical engineering
- Furniture / industrial design
- Sport, fitness & rehab
When do I use it?
- If I need an economical all-round material
- For low to medium surface speeds
- If the material needs to be suitable for different shafts
- For pivoting and rotation applications
When do I not use it?
- If mechanical rework is required
- If the very highest wear resistance is required
- If universal chemical resistance is required
- If temperatures are continuously higher than +180°C
- For use under water