showChainflexOnlineToolsTeaser

showReadycableOnlineToolsTeaser

showIgubalOnlineToolsTeaser

showProductPageAlsoForUnreleasedCategory

showDrylinTRailGuide

showEChainInteriorSeparators

showNewFairCategories

useSingleModelQueryV2

useLanguageInPath

useJsonLdQuery

useAssociatedProductsQueryV2

useNewHeaderUsOnly

useNewHeaderCaOnly

useNewHeader

useAssociatedModelsWithProductsByIdsV2

showRollers

showEChain

showEChainSelectedModelsOnly

showMotorFlanges

showConnectingCables

showMotors

showDriveTechnology

showDrylinLeadScrews

showDrylinLinearTechnology

showVATOnBallBearingsDeOnly

showCadSearchButton

showEchainLinearMovement

useNewHeaderDeOnly

showOverstockSale

showCoatingPowder

showTribotape

useRefactoredVerfahrwegBehavior

useNewHeaderLanguageSwitcher

enableOverstockSaleOnDemandPrices

useNewHeaderEuOnly

showVAT

showEChainHorizontalShelves

showEChainMountingBrackets

useNewMyIgusLogin

useEvergage

useCatalogDataApi

useNewMyIgusCHLocales

show3dPrinting

useIgusLocaleCookie

useNewMyIgusIT

show3dMovement

useNewMyIgusPL

useNewMyIgusAU

useNewMyIgusIE

useNewMyIgusCH

showBarStocks

ibh_useIcn

ibh_useFilterReleaseLocales

ibh_useAddToCartMultiSelection

showEChainStrainReliefs

ibh_useMultiFileDownload

showEchainSmartIotSolutions

showLowCostAutomation

showSeoContent

showNewHeaderLocalesConfig

echainSelectedModelIds

ignoredMenuCategories

abTestProductOverviewListOrGridUntil

newMyigusLocalesConfig

chainflexOverstockSaleLocales

releasedCategories

testJsonArray

testNumber

overviewListOrGrid

Rotules lisses auto-alignantes igubal®

Accessoires

Bague d'arrêt igubal® en polymère

Biellettes

Articulations angulaires / axiales

Ensemble avec chape

Palier applique

Secteur alimentaire

Paliers à semelle

Rotules lisses

Autres formes

Embouts à rotule

Calottes sphériques

Inserts pour paliers auto-aligneurs

Biellettes à pivot sphérique

Request Quote

Demander un devis

Explorer le marché de la robotique du RBTX

Aidez-nous à nous améliorer - Donnez-nous votre avis

La recherche de produits vous fournit un aperçu rapide de tous les câbles chainflex® entrant en ligne de compte pour votre application.

With the help of the inner separation configurator you can create a layout of the needed cables in the e-chain and get a feeling if there is enough space for every cable and where is the best position inside the e-chain.&nbsp;

Couldn't find the right shaft? Then simply configure your shaft the way you want it to be!

Find the right coupling joint for
your application: just enter your requirements and receive suitable suggestions
.

Customised processing of machined end without CAD software, 2D drawing and 3D step file, generated online, immediate price calculation, order online right away or request a quote&nbsp;&nbsp;

Trouver une solution individuelle à partir de plus de 950 câbles et 3.500 connecteurs et la commander.

Quickly find the perfect ball bearing for your application: simply enter your requirements and receive suitable ball bearings with a service life statement.&nbsp;

Easily find the perfect solution for your applications: enter your requirements and receive the suitable configuration.&nbsp;&nbsp;

Il est possible de commander ici, en 3 minutes, des câbles sur mesure au prix du jour, à partir de 1.000 m.

Calculer en quelques clics la durée de vie estimée des rotules lisses igubal

Trouver en ligne, rapidement et simplement, des câbles confectionnés selon des standards fabricant et les commander.

Calculez ici le supplément de cuivre au cours du jour pour votre calcul de prix des câbles.

Save time and money with free sample programs for your motor control system

With just a few clicks, you can put together a complete linear axis including motor, connection cables and built-on parts.

The right drylin E motor in just a few clicks. Simply enter your requirements and receive suitable suggestions.

Configure Do you want a ready-to-connect assembled energy chain, optionally with cables, or are you unsure whether the energy chain selected here is suitable for your application? Then use our e-chains® expert for selecting and calculating the right energy chain based on your application data.&nbsp;

Le nouveau système d'expertise xiros® pour rouleaux de renvoi recherche pour vous des rouleaux de renvoi xiros® adaptés et en calcule la flèche escomptée ainsi que le poids.

Use the service life calculator to determine the service life of an energy chain.&nbsp;

The Quickrobot is the easiest and fasted way to get with only a few clicks a complete dresspack for several robot manufacturers and types.&nbsp;

Help with selecting the ideal lead screw drive for your application, service life calculation for desired lead screw drive configuration, PDF download with all details about required application.&nbsp;

Tutoriels drylin® dryve D1 en ligne (films).

Missing something? Then simply configure your desired solution yourself. Use our configurator!

Unsure if it fits? Simply configure online with our roller bearing configurator

Trouver rapidement le matériau iglidur® adapté. L'outil de recherche iglidur® vous indique en quelques clics le palier lisse iglidur® adapté à votre application.

Test our motor control system online with the free browser application.

Product selection and service life calculation. By entering application parameters, you get the expected service life for iglidur® plain bearings.

<h3 style="text-align:start;">Do you require customised lead screw machining?</h3>
Configure quickly & easily online here.

Video instructions for applications, commissioning and assistance with your motor control system

Il suffit de saisir les paramètres de l'application pour trouver en quelques clics des plateaux tournants adaptés et obtenir leur durée de vie escomptée.

Service fabrication pour pièces sur mesure en matériaux iglidur®.

Les paramètres course, rayon de courbure et accélération vous fournissent la durée de vie du câble chainflex®.

The iglidur® Bearing Designer enables you to display price breaks for plain bearings in your individual dimensions and preferred material in just a few steps. At the end you will receive a technical drawing of your individual plain bearing if desired and can order it right away or request further information from us.&nbsp;

Can't find the right size? Simply configure here!

Des restes de différents types de câbles disponibles en différentes longueurs à des prix intéressants.

Bague d'arrêt igubal® en polymère (SRM-S20-V-KS)

iglidur® A350 | The endurance runner at higher temperatures in the food sector
iglidur® A350 is designed in such a way that it can be used for all loads in the food and packaging industry. Even high loads, as seen in lifting equipment or presses, are easy and the material works without any external lubrication.

Typical applications

Food industry
Beverage industry
Medical technology


When to use it?

When FDA compliance is required
When wear resistance and FDA are required for high loads
When the material is used in acid environments

When not to use it?

When temperatures are continuously higher than +180°C
When the maximum wear resistance is necessary
When a cost-effective FDA-compliant material is required
For high speeds



attributes_iglidur_k230_material_description

iglidur® H1 | Endurance runner with high media resistance
iglidur® H1 is the first choice when long service life is required under extreme ambient conditions. Extreme wear resistance is coupled with excellent resistance to temperature and media - not only in the packaging and food industries or the automotive industry.

Typical applications

Vending machinery
Beverage industry
Textile industry
Packaging industry


When to use it?

When maximum service life is required, influenced by temperature and humidity
When low coefficient of friction at high temperature is important
When normal aggressive cleaning is required (splashes, steam blasting)
For under bonnet applications

When not to use it?

When high surface pressures occur
When the best universal chemical resistance is required
When a cost-effective high-temperature material opposed to wear resistance is required
When an FDA-compliant material with high temperature resistance is required



iglidur E is particularly characterized by its long service life in combination with shafts made of aluminium. Especially in linear and swiveling motion profiles, iglidur E offers particularly good wear properties. 



attributes_iglidur_m210_material_description

iglidur® H4 | The automotive standard for temperatures up to +200°C
iglidur® H4 stands for high load capacity, good abrasion resistance and good temperature resistance, when economic aspects are also to be considered. Temperatures up to +200°C, permitted surface pressure up to 65MPa, and excellent chemical resistance are only some of the essential attributes. Solid lubricants reduce the coefficient of friction and support the wear resistance, which has been significantly improved compared to iglidur® H2 , which are also very cost-effective.

Typical applications

Vending machinery
Automotive
Packaging industry


When to use it?

For application with fuels, oils, etc.
When high wear resistance is required
For ﻿low coefficient of friction
For high temperature resistance from -40°C to +200°C
For high chemical resistance

When not to use it?

For underwater use
When a cost-effective universal material is sought
When a temperature and media-resistant material for static applications is required



iglidur® GLW | Low-cost material for large volumes
With iglidur® GLW we can offer our customers an alternative to iglidur® G for large series applications. Featuring similar mechanical properties as iglidur® G, iglidur® GLW is primarily recommended for static loads. These applications, where the properties of iglidur® G are unimportant to a degree , iglidur® GLW presents a cost-effective alternative.

Typical applications

Automotive
Machine tools
Robotics


When to use it?

When an economical universal material for high volumes is required
For high, primarily static loads
For low to medium speeds

When not to use it?

When mechanical reworking of the wall surface is required
For primarily dynamic loads
When extreme wear resistance is required
For use under water



attributes_iglidur_ecop210_material_description

iglidur® J4 | Lowcost material
iglidur® J4 is the low-cost material for long service life at low to medium loads.

Typical application areas

3D printers


When do I use it?

When I am looking for a lubricant-free and maintenance-free material
When I am looking for a low-cost material for large series
When I need low coefficients of friction
If I need good media resistance If I need low moisture absorption

When do I not use it?

For high loads When I have high temperatures in my application



iglidur® J | The versatile endurance runner
iglidur® J is characterised by the lowest coefficients of friction in dry operation and its very low stick-slip tendency. With a maximum recommended surface pressure of 35MPa, iglidur® J is not suitable for extreme loads.

Typical applications

Vending machinery
Printing industry
Beverage industry
Aviation
Cleanroom


When to use it?

For high speeds
When highest wear resistance at low to medium pressures is required
Low wear against different shafts
When a low coefficient of friction in dry operation is requested
For vibration dampening
When good chemical resistance is required
For best performance with soft shaft materials
Low moisture absorption

When not to use it?

When high pressure loads occur
When temperatures of greater than +120°C occur in the short term
When a cost-effective bearing for occasional movements is sought



iglidur® P210 | Specialist for swivels, roller applications and more - Good friction and wear values on almost any shaft
With iglidur® P210, the user has a versatile all-rounder material at his disposal, which has an above-average service life, especially in swivel applications with medium loads of up to 20 MPa. The versatile material has already proven itself in numerous customer-specific solutions and as a semi-finished product material. Clip-on or pre-stressed designs and use in vehicle interiors are possible.

Typical areas of application

Agricultural engineering
Mechanical engineering
Furniture / industrial design
Textile industry


When do I use it?

If you are looking for a universal material for use in damp environments
When a very wear-resistant material is required for swivel applications in the medium load range
When edge loads and impacts occur
If the surface pressure of iglidur® J is not sufficient

When do I not use it?

When a universal material with the greatest possible variety of dimensions is sought
If a material is required for very highly loaded swivel applications
When temperatures greater than +100 °C occur



iglidur® L500 | For extreme rotational speeds
iglidur® L500 is a material especially for high rotational speeds and fast sliding movements at low loads. Due to the low thermal expansion and low moisture absorption, bearings can be manufactured with very low backlash. Applications in which these advantages play a role include fans, small motors, high-speed sensors and magnet technology.

Typical areas of application

Automotive
Mechanical engineering


When do I use it?

For high-speed rotation applications
When maximum service life is required
For high pv values at low loads
For operating temperatures up to +250 °C (permanent, short-term up to max. +350 °C)

When not to use it?

If you are looking for a universal material for high temperatures
When medium to high pressure loads occur
For oscillating applications




Electrostatically dissipative (ESD), without interference currents in live parts
Contact resistance 10^6 – 10^9 Ohm x cm
Increased rigidity
Colour: black (continuous)


Selective laser sintering (SLS) material: iglidur i9-ESD
The laser sintering powder iglidur i9-ESD has a electrical resistance of 10^6 to 10^9 Ohm. This makes it electrostatically dissipative (ESD), and at the same time reduces the risk of unwanted discharge currents between sensitive, electrical components. This makes it ideal for applications in the electronics and semiconductor industries, and especially for electronic connectors.

When to use it?

When antistatic components with medium conductivity are needed
For applications under water or with high humidity
When components with high stiffness are required
When components with high UV resistance are required
When black components are required

When not to use it?

If I need ESD parts with better conductivity (→ iglidur i8-ESD)
For worm wheel applications (→ iglidur i6)
If the application requires a food grade material (→ iglidur i6 or iglidur i6-BLUE)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)



iglidur® L250 | For high speeds
iglidur® L250 is a material especially for high speeds, fast sliding movements and low coefficients of friction. The material can exploit these advantages especially at low loads. Applications in which these advantages play a role are fans, small motors, fast-running sensors or magnet technology.

Typical areas of application

Automotive


When do I use it?

For high-speed rotation applications
When maximum service life is required
For low loads
When low-noise running is required
For very low coefficients of friction

When not to use it?

When high pressure loads occur
When temperatures are permanently higher than +90 °C
When low moisture absorption is required



iglidur® C | Free from PTFE and silicone, good abrasion resistance
iglidur® C was developed especially for applications where the use of PTFE and silicone is not possible. Such applications can be found in the electronics, tobacco and beverages industries, as well as many painting processes. Keywords like paint compatibility and silicone-free make it useful to study this material more closely. 

Dry operation
Good abrasion resistance
Lubrication- and maintenance-free


When to use it?

When PTFE and silicone are not allowed in the application
For applications with low speed
If dirt-resistant materials are required
If maintenance-free, self-lubricating materials are needed


When not to use it?

When highest wear resistance is needed
When lowest coefficients of friction are required
If a cost-effective option is requested
When low moisture absorption is required 



iglidur® J350 | Endurance runner with high dimensional stability at temperature - applicable with many shafts and load collectives
A superior material for rotational applications - and that on many different steel shafts: The service life of iglidur® J350  can often be multiplied at loads between 2MPa and 50MPa. In addition, the high temperature resistance makes it a very versatile material.

Typical applications

Vending machinery
Automotive
Glass industry
Machine tools


When to use it?

When a wear-resistant material for rotational movement at medium and high loads is required
When a cost-effective material is required for use at high temperatures
When press-fit up to +150°C is necessary
When high wear resistance is required at high loads
When the material is exposed to shock loading

When not to use it?

When continuous operating temperatures are higher than +180°C
When the lowest friction is required
When a cost-effective, low-friction mterial is sought
At high peripheral speeds



iglidur® HSD350 | Media-resistant and hygienic at low costs
The new material enables continuous use where hygiene is important, including regular sterilisation, with an outstanding price/performance ratio.

Typical application areas

Fluid technology
Medical technology


When to use it?

When the bearing point is regularly sterilised using hot steam
When a low-cost material is needed at the same time
When good chemical resistance is required
Low moisture absorption

When not to use it?

When high pressure loads occur
When short-term temperatures higher than +120°C occur
When a cost-effective material for occasional movements is necessary



iglidur® N54 | The biopolymer, based on renewable raw materials
iglidur® N54 is the first iglidur® material that is largely based on biopolymers. In addition to the fact that all iglidur® materials are already lubricant-free, this is a further step towards a positive environmental balance. Good coefficients of friction paired with service lives that allow series use in sporadically moving applications give this material a firm place in the iglidur® program.

Typical areas of application

Mechanical engineering
Furniture / industrial design


When do I use it?

For sporadically moving applications with low to medium loads
For quasi-static loads
When the environmental balance of a product needs to be optimized

When do I not use it?

When a universal standard material is required
When there is a high frequency of movement and continuous operation
When elevated temperatures are present



With DIN EN 45545, the new iglidur RW250 material fulfills the strict fire protection requirements of railroad technology. In addition, the material formulation has been optimized for absolute wear resistance and offers very good running properties in many applications.  


Die Werkstoffe der ECON-Serie, iglidur J4, GLW, P4, PLW210, ALW350, HLW und NEU: Q2LW sind nicht nur für viele Anwendungsbereiche bestens geeignet, sondern nun auch im europäischen Markt in Standardabmessungen verfügbar.  
Vorteile: 

Universell einsetzbar
Varianten für hohe Temperaturen
Lebensmitteleinsatz und Verschleißfestigkeit verfügbar
Kostengünstig, besonders bei größeren Stückzahlen
Ca. 50 % reduzierter CO2-Fußabdruck  



iglidur® R | Low-cost material, low coefficients of friction
In the development of iglidur® R, the focus was on high performance and a very low price. In particular, low friction and wear values were to be achieved in dry running. Components made of iglidur® R are specifically supported by a combination of solid lubricants. The PTFE and silicone-free material achieves outstandingly low friction values in dry running and runs largely stick-slip-free.


Typical areas of application

Motorcycle/Rolloler
Furniture/industrial design
Sport, fitness &amp; rehab



When do I use it?

When high wear resistance at low loads is required
When a very inexpensive material is required
When very low coefficients of friction are required in dry running
When edge loads occur
When low moisture absorption is desired
When PTFE or silicone are not approved for the application

When should I not use it?

When high pressure loads occur
When temperatures are permanently higher than +90 °C
When the best possible wear resistance is required 



iglidur H5 was developed especially for use in corrosive environments in which high edge pressures and impact loads also occur.


Iglidur® Q290 | medium to high loads, especially on soft shafts
iglidur® Q290 shows excellent service life in robust swivel applications, such as those frequently encountered in agricultural machinery, especially on “soft” shafts (e.g. galvanized). The stress on the shafts is also minimal.

Typical areas of application

Agricultural technology
Construction machinery


When do I use it?

When a durable material is required for robust
operating conditions (agriculture, construction machinery, ...)
with medium to high dynamic loads
on “soft” shafts is required

When should I not use it?

If permanent static loads greater than 55 MPa occur
If a very wear-resistant material is required on “soft” shafts
is required for low loads
If temperatures greater than +140 °C occur permanently 




Higher application temperature up to 110 °C
Highest flexural strength of 94 MPa at 20 °C
PFAS-free
Electrostatic dissipative (ESD)


Selective laser sintering (SLS) material: iglidur i230
The iglidur i230 laser sintering powder stands out as another all-rounder material among the iglidur SLS materials. Unlike iglidur i3, however, it is designed for higher application temperatures and withstands long-term temperatures of up to 110 °C. Moreover, the material is 80 % more wear-resistant than PA12. Of all iglidur SLS materials, iglidur i230 offers the highest flexural strength and, in addtion, it has electrostatically dissipative (ESD) properties.
Good to know: iglidur i230 contains no PTFE and is therefore not affected by future PFAS regulations.

When to use it?

When a PFAS-free material is required
If the application temperature is above 80 °C in the long term and at a maximum of 110 °C
If components with high mechanical strength (also structural components) are required
If components with ESD properties are required up to 110 °C application temperature

When not to use it?

If components with higher wear resistance at max. 80 °C application temperature are required (→ iglidur i3)
If components with ESD properties up to 80 °C application temperature are required (→ iglidur i8-ESD or iglidur i9-ESD)
For worm wheel applications (→ iglidur i6)
If the application requires a food-safe material (→ iglidur i6)
When components with higher elasticity are required (→ iglidur i10)
If the application temperature is higher than 110 °C in the long term (→ iglidur A350 or iglidur RW370)



The special feature of iglidur AX500 is that it is a conductive material. In addition, AX500 has an even lower wear value than its predecessor. The material was developed especially for the food industry and can therefore be used in contact with food without any problems.


 iglidur® J260 | Ideal for plastic shafts 
The material iglidur® J260 proves itself again and again where the highest service life and coefficients of friction are required - especially in connection with plastic shafts! iglidur® J260 is similar to iglidur® J, an endurance runner with excellent wear properies, whereby the upper long-term application temperature of +120°C offers more reserves. 
  
Typical applications  

Vending machinery 
Machine tools 
Robotics 

  
When to use it? 

When polymer shafts are used 
When the temperature rating of iglidur® J is notsufficient 
When a material with low coefficient of friction isrequired 
When high wear resistance is required at medium loads 
When good liquid media resistance is required 

When not to use it? 

When high surface pressures occur
When continuous operating temperatures are higher than+120°C
When universal wear resistance is required 



Iglidur® RW370 | Wear-resistant for railroad technology
The first iglidur® material that fulfills the European fire protection standard for rail vehicles is suitable for numerous wear-stressed applications in railroad technology due to its very complete property profile.


Typical areas of application

Furniture/industrial design
Transportation technology


When do I use it?

For applications in railroad technology that require suitability in accordance with DIN EN 45545
When high wear resistance at low to medium pressure loads is required
When low friction values are required in dry running
Low moisture absorption

When should I not use it?

When high pressure loads occur and suitability according to DIN EN 45545 is not required
When temperatures briefly exceeding +190 °C occur
If a cost-effective material is required for occasional movement 



iglidur® W300 | The endurance classic, very wear-resistant on (almost) all shafts
iglidur® W300 offers high wear resistance, even in rough shafts or very abrasive ambient media. This material is the most tolerant of these external effects out of all the iglidur® range.

Typical applications

Vending machinery
Printing industry
Wood industry
Machine tools


 When to use it?

When especially high service life is necessary
When low coefficient of dynamic friction and high wear resistance are required
For use on 304 stainless steel shafts
For harsh environments and rough shafts
Dirt-resistant


When not to use it?

For high loads from 50 MPa
When temperatures continuously greater than +90 °C are present
For very wet environments
When an exceptionally economical material is desired 



iglidur® A181 | The universal material for food contact
The material iglidur® A181 offers both FDA and 10/2011 EC compliance. The blue colour also facilitates the &#34;optical detectability&#34; often desired in the food sector. Compared to iglidur® A180 with regard to the mechanical properties, temperature and media resistance, iglidur® A181 is more suitable with respect to the wear resistance in most cases.

Typical applications

Beverage industry
Food industry
Medical technology


When to use it?

When FDA compliance is required
When a material conforming to the 10/2011 EC is required
When an universal material suitable for direct contact with food is required

When not to use it?

When FDA and 10/2011 EC regulation compliance are not required
When continuous operating temperatures are higher than +90°C
When a cost-effective universal material is sought



iglidur® G | The all-rounder
The widest range of different requirements is covered by iglidur® G. Therefore, the material is rightly called universal. Typical applications include medium to high loads, medium surface speeds and medium temperatures. iglidur® G is the decathlete among iglidur® materials. It performs very well in all technical disciplines and is the classic all-rounder, primarily with respect to the overall general, mechanical, thermal and tribological specifications.

Typical areas of application

Agriculture
Automotive
Construction machinery
Machine tools
Fitness and sports


When to use it?

When an economical all-round performance material is required
For low to average surface speeds
When the material needs to run on different shaft materials
For pivoting and rotational movements

When not to use it?

When mechanical rework is required
When the highest wear resistance is required
When universal chemical resistance is required
When temperatures are continuously greater than +130°C
When used under water



iglidur® F | Electrically conductive, highly pressure-resistant
Highest stiffness and hardness, in addition particularly conductive: when it comes to the electrical conductivity of materials, i.e. especially in applications where electrostatic charging must not occur, iglidur® F is the right choice. The iglidur® F is extremely pressure-resistant. At room temperature, they could be statically loaded up to 105MPa.

Typical applications

Automotive
Textile industry


When to use it?

When the material should be electrically conductive
For high static loads

When not to use it?

When mechanical reworking of the material is required
When extreme wear resistance is required
When very low coefficient of friction in dry operation is required
For use under water
When a universal material is sought



attributes_igutex_tx3_material_description

attributes_iglidur_uw160_material_description

iglidur® H370 | Highest service life under water and high media resistance
For applications under water, iglidur® H370 is the right solution. The material absorbs extremely high loads, is resistant to chemicals and can be used at temperatures up to +200°C.

Typical applications

Fluid technology
Offshore
Shipbuilding
Heavy machinery / Plant construction
Packaging industry


When to use it?

For use under water
When high temperature resistance is required
When high mechanical loading and wear resistance is required
When good chemical resistance is required

When not to use it?

When mechanical reworking of the wall surface is required
When high wear resistance in temperatures is required
For use in heavy dirt
When a low-cost, high-volume solution is needed



iglidur® A200 | FDA-compliant for low speeds
iglidur® A200 is suitable for use in direct contact with food. It is the ideal solution for bearing points on machines for the food industry, medical equipment manufacturing, small household appliances, etc. Since the addition of solid lubricants had to be dispensed with to ensure food compatibility, iglidur® A200 is specially designed for abrasion resistance. Additionally, the iglidur® A200 is characterised by its ability to embed dirt and by its quiet operation.

Typical applications

Food industry


When to use it?

Suitable for contact with food
When a low noise level is required
When dirt needs to become embedded
When FDA compliance is required

When not to use it?

When the maximum wear resistance is necessary
When temperatures greater than +80°C occur in the long term
When a cost-effective universal material is sought
For operations in wet environments



iglidur® A160 | FDA and EU regulation-compliant for chemicals and food
iglidur® A160 is characterised by extreme media resistance at low costs. Tribologically optimised, the material can be used up to +90°C and also meets the conformity requirements of the food processing sector. The property profile is rounded off by the &#34;optical detectability&#34; often desired in the industry, i.e. the blue colour.

Typical application areas

Beverage industry
Food industry
Medical technology


When to use it?

When a material with maximum media resistance is required
When a cost-effective material with high media resistance is required
When a material conforming to the 10/2011 EC is required

When not to use it?

When a universal material is needed for the food industry
If a very media-resistant material is sought for applications at more than +90°C
When a low-cost material with high wear resistance in dry operation is required



attributes_iglidur_uw_material_description

iglidur® X | The chemical and temperature specialist, stable up to 150MPa
iglidur® X is designed for higher speeds than other iglidur® materials due to its high temperature resistance in conjunction with high compressive strength and chemical resistance.Typical applications

Beverage industry
Wood industry
Plastic machines
Aviation 
CleanroomWhen to use it?
For pressure loads up to 150MPa
For linear movements with stainless steel at high temperatures
Universal chemical resistance
For temperature resistance from -100°C to +250°C (short-term up to +315°C)
For very low moisture absorption
For high wear resistance over the entire temperature range


When not to use it?

For very low wear at high loads
When a low cost material is needed for underwater use
For edge loads 



attributes_iglidur_p4_material_description

iglidur® A500 | The endurance runner at higher temperatures in the food sector
iglidur® A500 is approved for direct contact with food. It has an exceptionally good chemical resistance and is ideal for the most difficult applications of machines for the food industry. Although iglidur® A500 is a very soft material, it also has an excellent compressive strength, even at high temperatures.

Typical applications

Beverage industry
Food industry
Medical technology


When to use it?

When FDA compliance is required
When a high chemical resistance is required
When good abrasion resistance is required
Temperature-resistant from -100°C to +250°C

When not to use it?

When extreme wear resistance is required
When high temperature and chemical resistance is not required
When a cost-effective universal material is sought



attributes_igutex_tx2_material_description

iglidur® B | High elasticity and low-noise
The compressive strength of the iglidur® B is low however this is an important property of this material. It is mainly used where vibration dampening and acoustic separation are required. When to use it?

When maximum vibration dampening is required
When sealing function has to be integrated
When high edge loads occur


When not to use it?

In high humidity applications
When a cost-effective universal material is required
When high wear resistance is required 



iglidur® AB | The first antibacterial iglidur® material
iglidur® AB helps to reduce the level of bacterial contamination in bearing points that are difficult to access. iglidur® AB was specifically developed for applications in areas with high hygiene requirements. Often such applications are manually operated pivots (doors, medical furniture, etc.). The material reduces the level of bacterial contamination but - like all &#34;anti-bacterial&#34; materials - is not a substitute for adequate hygienic measures.

Typical application areas

Medical technology
Laboratory technology
Ventilation systems
Sanitary furniture and equipment
Bearings of patient and care furniture


When to use it?

When bearing points must meet high hygienic standards
When a universal material for manual applications is required
When a material for low to medium loads is required

When not to use it?

When a highly wear-resistant material is required for continuous dry operation
When a material complies with the EU regulation 10/2011 EC and/or the FDA requirements for repeated food contact is sought
When a material with the highest universal media resistance is required



iglidur® M250 | The robust all-rounder with outstanding vibration damping
The self-lubricating material iglidur® M250 is particularly characterized by impact strength, vibration damping and wear resistance. It proves itself particularly well under stresses where a vibration-damping function of the material is required, e.g. in sports equipment and packaging machines. As it is also capable of embedding dirt, it is also suitable for agricultural machinery and gardening equipment.

Typical areas of application

agricultural engineering
Mechanical engineering
Furniture / industrial design
Textile industry


When do I use it?

When the material is exposed to heavy soiling
For excellent vibration damping
At low to medium speeds
When mechanical reworking is required
Insensitive to edge pressure
High impact strength
Thick wall thicknesses according to DIN 1850

When should I not use it?

For applications in wet areas
When very high precision is required
For very smooth shafts
When a cost-effective material with maximum wear resistance is required



iglidur® G1 | The new lubrication-free standard
With iglidur® G1 we offer a wear-resistant and versatile material for a wide range of applications. Recommended for applications with medium to high loads at medium speeds. Even at elevated temperatures up to 180°C, iglidur® G1 is dimensionally stable, wear-resistant and offers very low moisture absorption. iglidur® G1 is suitable for a multitude of different applications and represents an all-rounder with very good running performance.

Typical applications

Automotive
Machine tools
Furniture/Industrial design
Fitness and sports


When to use it?

When an economical all-round performance material is required
For low to average surface speeds
When the material needs to run on different shaft materials
For pivoting and rotational movements

When not to use it?

When mechanical rework is required
When the highest wear resistance is required
When universal chemical resistance is required
When temperatures are continuously greater than +180°C
When used under water



iglidur® Q | For high loads - wear-resistant on many shafts
iglidur® Q was developed especially for extreme loads. Under high loads, iglidur® Q is one of the iglidur® materials with by far the best wear resistance. From a radial load of 25 MPa, even the highly abrasion-resistant iglidur® W300 is surpassed. Special solid lubricants distributed extremely finely in the material ensure that maintenance-free dry running is guaranteed under any load.

Typical areas of application

Agricultural technology
Construction machinery
Traffic engineering


When do I use it?

For swivel applications
For very good abrasion resistance, especially under extreme loads
For extreme p x v values
If the material should be insensitive to dirt

When should I not use it?

For use under water
When temperatures are permanently higher than +135 °C
If high edge loads or heavy impact loads occur



attributes_igutex_tx1_material_description

iglidur® X6 | Service life up to six times longer than iglidur® X
Thanks to nano technology, iglidur® X6 has a service life up to six times longer than the high-performance material iglidur® X in many swivel and rotation applications - even beyond +100 °C.

Typical application areas

Fluid technology
Glass industry
Food industry
Mechanical engineering
Textile industry 


When do I use it?

When temperatures greater than +150 °C occur
If the wear resistance of iglidur® X is not sufficient during swiveling and rotation
If the press fit is to be improved compared to iglidur® X
If the highest media resistance is required
When freedom from PTFE is required

When do I not use it?

When a cost-effective universal bearing is sought
When a bearing for underwater use is sought
If you are looking for a wear-resistant high-temperature bearing for linear strokes 



iglidur® D | Low-cost material with silicone
In the development of iglidur® D, a very low price was at the top of the requirement profile. In particular, low coefficient of friction was required at high speeds in dry operation. This material containing silicone achieves low coefficient of friction in dry operation and runs with virtually no stick-slip.

Typical applications

Model building
Furniture/Industrial design
Fitness and sports


When to use it?

When low coefficient of friction is required
For high speeds
For low load
When looking for a very cost-effective material

When not to use it?

When high pressure loads occur
When silicone-free parts are required
When temperatures continuously greater than +90°C are present



The materials of the ECON series, iglidur J4, GLW, P4, PLW210, ALW350, HLW and NEW: Q2LW are not only ideally suited for many applications, but are now also available on the European market in standard dimensions.  
Advantages: 

Universally applicable
Variants for high temperatures
food use and wear resistance available
Cost-effective, especially for larger quantities
Approx. 50 % reduction in CO2 footprint 



attributes_iglidur_eco_g_material_description

iglidur® Q2 | The durable heavy-duty material
iglidur® Q2 stands for high load-bearing capacity and good abrasion resistance under high loads. The price-performance ratio is outstanding. Solid lubricants reduce the coefficient of friction and support the wear resistance, which has been significantly improved compared to other iglidur® materials, especially for highly loaded swivel applications.

Typical areas of application

Agricultural technology
Construction machinery
Mechanical engineering


When do I use it?

When high dynamic loads occur
If, in addition to high loads, shocks, impacts and dirt occur
For highly loaded swivel applications

When do I not use it?

If only static loads occur
When high pv values occur at high speeds
If an inexpensive all-rounder material is required
When soft shafts are used



iglidur® H | High temperature and chemical resistance
iglidur® H is a fibre-reinforced thermoplastic material that was specially developed for applications in high humidity or under water. iglidur® H can be used completely free of lubrication; in wet applications, the surrounding media acts as additional lubricant. Suitable for temperatures up to +200°C. Very low coefficient of friction when used with hardened shafts.

Typical applications

Beverage industry
Medical technology
Offshore
Shipbuilding


When to use it?

﻿For underwater applications
When high temperature resistance is required
For high mechanical loading
For applications in contact with chemicals

When not to use it?

When extremely high wear resistance under water is required
When the best universal resistance to chemicals is required
For maximum compressive strength at higher temperatures



iglidur® J3 | The new endurance runner: specialist for pivoting loads
iglidur® J3 is a material with improved wear resistance at low to medium loads and high speeds. The service life is up to 300% higher than that of iglidur® J, the proven top endurance runner material.

Typical application areas

Vending machinery
Printing industry
Beverage industry
Glass industry
Aviation


When to use it?

When optimising wear resistance compared to iglidur® J
When very low coefficients of friction in dry operation are required
When high wear resistance at low loads is required
When low moisture absorption is fundamental
When good liquid media resistance is required

When not to use it?

When a wear-resistant material is required for linear strokes
When continuous operating temperatures are higher than +90°C 
When radial surface pressure is higher than 45MPa



iglidur® Z | Longest service life under extreme conditions - Wear-resistant &amp; impact-resistant even under high loads and temperatures
Highest compressive strength, coupled with high elasticity, gives iglidur® Z its outstanding properties in connection with soft shafts, edge loads and impacts. At the same time, the bearings are suitable for temperatures up to +250 °C.

Typical areas of application

Construction machinery
Glass industry
aerospace industry
Mechanical engineering
Textile industry


When do I use it?

At temperatures up to +250 °C, continuous; or +310 °C, short-term
When high wear resistance is required, especially under high radial loads
For high sliding speeds
For edge pressure in conjunction with higher surface pressures

When should I not use it?

For low loads and temperatures
When an inexpensive all-round material is required
When an electrically conductive material is needed



attributes_iglidur_q3e_material_description

iglidur® J2 | Environmentally friendly, versatile and cost-effective
iglidur® J2 has a good universal media resistance comparable to iglidur® J and similar materials. The mechanical specifications in sporadically moving applications are better, but in comparison there are significant reductions in friction and wear. Like all iglidur® materials, iglidur® J2 is PFOA-free.

Typical applications

Model building
Robotics


When to use it?

When low moisture absorption and good media resistance is required for static load
When a cost-effective plain bearing is required for use in a wet environment with low pv values
When there is basic lubrication of the bearing

When not to use it?

When a highly wear-resistant bearing is required for continuous dry operation
When low moisture absorption and media resistance play a minor role
When resistance to high temperatures and chemicals is required



iglidur® P | The favorable outdoor all-rounder - No swelling even with high ambient humidity
Due to its thermal stability and low water absorption, iglidur® P is one of the most dimensionally stable all-rounder materials for changing ambient conditions. iglidur® P is recommended for swivel and rotational movements with medium loads.

Typical areas of application

Mechanical engineering
Furniture / industrial design
Solar technology
Sports, fitness &amp; rehab
Traffic engineering


When do I use it?

When low moisture absorption is required
When a cost-effective material for high pressure loads is required
When higher precision is required in damp and medium temperatures

When do I not use it?

When mechanical reworking is required
When maximum wear resistance is required



attributes_iglidur_l100_material_description

iglidur® UW500 | For hot liquids and fast, continuous movements
iglidur® UW500 was developed for underwater applications, where higher temperatures up to +250°C occur. The material can also operate in chemicals with media lubrication.
Typical applications

Automotive
Glass industry
Food industry
Machine tools
Heavy machinery/Plant construction


When to use it?

When the material needs to be used in liquids
For high speeds
For high temperatures
When a high chemical resistance is required


When not to use it?

When a low-cost underwater material for the normal temperature range is required
When looking for a low cost underwater material for infrequent operations
When a cost-effective universal material is sought 



The proven long-life material iglidur® J3 is now also available in black. The endurance runner has been specially developed for swivels and swelling loads and is also resistant to media.


attributes_iglidur_tx1_material_description


Versatile use: good combination of high wear resistance, strength and temperature resistance


Self-lubricating filament iglidur i180 
Components made from the 3D printing material iglidur i180 can be used universally for all types of wear parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds.

When to use it?

When an increased permanent application temperature of up to 100°C is required
For highly dynamic plain bearing applications


When not to use it?

If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260)



iglidur® A180 | The FDA-compliant all-rounder
iglidur® A180 is suitable for use in direct contact with food. It is therefore the ideal solution for bearing points on machines for the food and packaging industry, medical equipment manufacturing and small household appliances, etc. Even where wet cleaning or process-related contact with moist media is the order of the day, iglidur® A180 is characterised by minimal moisture absorption.

Typical application areas

Beverage industry
Food industry
Medical technology


When to use it?

When the material has direct contact with food
When FDA compliance is required
When a low noise level is required
When low moisture absorption is fundamental

When not to use it?

When only the highest wear resistance is required
When temperatures permanently higher than +80°C occur
When an inexpensive universal bearing is sought




Food compliant according to EU Regulation 10/2011
High abrasion resistance at low surface speeds 


Easy-to-process, abrasion-resistant filament - suitable for food contactiglidur i150 is characterised by high wear resistance, as the material is enriched with solid lubricants. It can be processed just as easily as standard PLA and PETG filaments. Due to its high wear resistance and good mechanical properties (strength, toughness, layer adhesion), it is an all-rounder material that is suitable for most applications and 3D printers. This makes it by far the most frequently used igus filament. There are restrictions only in terms of the maximum permanent application temperature of 65°C and for highly dynamic applications.Furthermore, it is suitable for food contact due to the conformity according to EU 10/2011 and is therefore ideal in applications in the food and packaging industry.  


The material offers excellent friction and wear values at low to medium loads.
Areas of application: 

Packaging machines
Textile machinery
Furniture design 



iglidur® H2 | Low cost, for high temperaturesWhen using iglidur® H2, economic aspects are in the focus. It is the first time that it is possible to offer such a high-performance material for high volume applications with these technical advantages at such a cost-effective price: temperatures up to +200°C, permitted surface pressure up to 110N/mm², and excellent chemical resistance. The iglidur® H2 material is self-lubricating and suitable for all motions.Typical applications

Automotive 


When to use it?

For use under water
When a cost-effective material is required for use at high temperatures
For applications with fuels, oils, etc.
Resistant to chemicals


When not to use it?

When extreme wear resistance is required
When vibration dampening is required
When neither increased temperatures nor media contact occur 



iglidur® C500 | High media and temperature resistance, up to +250°C, wear-resistant
iglidur® C500 can be used in applications up to +250°C and is extremely media-resistant (such as in cleaning processes with hydrogen peroxide), wear-resistant and has low coefficients of friction. Also suitable for various special designs. The colour shows the use under extreme environmental influences.

Typical applications

Automotive
Glass industry
Food industry
Machine tools
Heavy machinery / Plant construction


When to use it?

When an extremely media-resistant material with high flexibility is required
When you need a highly wear-resistant and media-resistant material

When not to use it?

When an FDA-compliant high temperature material is required
When you need a media-resistant, high-temperature material with the largest possible range of dimensions



iglidur® K | Versatile and cost-effective for medium temperatures
iglidur® K is the cost-effective universal material for medium temperatures and applications under various environmental influences such as moisture and media.

Typical areas of application

Printing industry
Plastics machinery
Medical technology
Packaging industry


When do I use it?

When a cost-effective all-rounder material is required
When it is used in a damp environment
When good wear resistance up to medium loads is required

When do I not use it?

When maximum wear resistance is required
When maximum media resistance is required
When a high-temperature material is required



iglidur® J200 | Specifically for aluminium shafts
iglidur® J200 is the result of the development of particularly low-friction materials. When using it in linear motion, friction can be critical. Many materials can give low coefficients of friction under high loads, but this material can give excellent coefficients of friction even at low loads.

Typical applications

Vending machinery


When to use it?

For applications with anodised shafts
When lowest coefficient of friction is required
When long service life at low loads is required

When not to use it?

When steel shafts are provided
When continuous operating temperatures are higher than +90°C
When a cost-effective universal material is sought



Specially developed for the food sector, iglidur® A230 is particularly suitable for machines and systems with food contact due to its optically easily detectable color, low moisture absorption and conformity according to FDA and EU10/2011 directive. 



 iglidur® H3 | Tough, wear-resistant, durable
With iglidur® H3 there is a new material in the iglidur H family. H3 sets new standards with its high durability. This material is tougher than comparable materials and achieves a longer service life than iglidur H1. iglidur H3 was developed primarily for use in pumps and demanding media and shines with its low moisture absorption. 
 


Bague d'arrêt igubal® en polymère

Description du produit

Données techniques

Outils en ligne

Téléchargements