iglide® J350 | Endurance runner with high dimensional stability at high temperature - Can be used with many kind of shafts and loads
 

• Excellent coefficient of friction against steel
• Continuous service temperature up to +356°F
• For medium and high loads
• Particularly well suited to rotating movement
• Lubrication and maintenance-free
• Standard range from stock

An outstanding bearing for rotating applications – and for a wide range of different shaft materials: With iglide® J350 bearings, the lifetime can often be increased for applications between 290 and 7251 psi. In addition, the high temperature resistance makes it a very versatile material.
 
Typical application areas

Automotive onboard and manufacturing
Glass manufacturing and processing
Machine tools

You will find plenty of additional application areas at our Industry solutions
 
 

When to use it? If a high wear resistant bearing for rotating movement at medium and high loads is required When a cost-effective bearing for high temperatures is required If press-fit up to +302 °F is necessary If high wear resistance is required at high loads If the bearing is exposed to shock loading

When not to use? If permanent temperatures exceed +356 °F If low friction is required When a cost-effective bearing with a low friction is needed With high rotational speeds   Use our filter options to find the most suitable product

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining