1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: FFM-0405-04
- Material: iglide® F
- Shape: Flange bearings
- Dimensions:
- d1 4 mm
- d2 5.5 mm
- d3 9.5 mm
- b1 4 mm
- b2 0.75 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for 96 PFAS substances considered critical for the environment and health. This category excludes substances from the group of fluoropolymers.
- Electrically conductive, highly pressure-resistant
- Electrically conductive
- High compressive strength
- Good temperature resistance
iglidur® F | Electrically conductive, very pressure-resistant
Highest stiffness and hardness, and particularly conductive. When it comes to the electrical conductivity of materials, especially in applications where electrostatic charging must not occur, iglidur® F is the right choice. In addition, iglidur® F is very pressure-resistant. At room temperature, it can be statically loaded with up to 105MPa.
Typical application areas
- Automotive
- Textile industry
When do I use it?
- If the material needs to be electrically conductive
- For high static pressure loads
When do I not use it?
- When mechanical rework is required
- When maximum wear resistance is required
- When a very low coefficient of friction is required in dry operation
- For use under water
- When a universal material is required
Unsure if it fits?