iglide® Q290, Sleeve bearings, mm

Heavy-duty on soft shafts

1 from 2

Part number: Q290SM-1416-20
Material: iglide® Q290
Shape: Sleeve bearings
Dimensions:
- d1 14 mm
- d2 16 mm
- b1 20 mm
Customize dimensions
Manufacturing method: Injection molding
Service life:

Material properties:

PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for the 96 PFAS substances considered critical for the environment and health using the SQP M1227 test method (LC-MS/MS and GC-MS) and do not contain any substances >0.1% by mass. This category excludes substances from the group of fluoropolymers.

For moderate to high loads, especially on soft shafts
Long life especially on soft shafts
Resistant to edge loads
Continuous use up to +284 °F

iglidur® Q290 | Medium to high loads, especially on soft shafts

iglidur® Q290 shows outstanding service life in robust pivoting applications, such as those frequently encountered in agricultural machinery, especially on "soft" shafts (e.g. galvanised). The stress on the shafts is also minimal.

Typical application areas

Agricultural engineering
Construction machinery

When do I use it?

If a durable material for robust
conditions of use (agriculture, construction machinery, ...)
for medium to high dynamic loads
on "soft" shafts is needed

When not to use it?

If permanent static load greater than 55MPa occurs
If a very wear-resistant material on "soft" shafts
is required for low loads
span style="color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, "Helvetica Neue", Helvetica, Arial, sans-serif;">If temperatures permanently exceed +140°C

Unsure if it fits?