1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: L500FM-0304-05
- Material: iglide® L500
- Shape: Flange bearings
- Dimensions:
- d1 3 mm
- d2 4.5 mm
- d3 7.5 mm
- b1 5 mm
- b2 0.75 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for 96 PFAS substances considered critical for the environment and health. This category excludes substances from the group of fluoropolymers.
- Temperature-resistant and media-resistant
- Continuous use up to +482 °F
- Up to 984 fpm rotating
- Excellent wear resistance
iglidur® L500 | For extreme rotational speeds
iglidur® L500 is a material especially for high speed and fast sliding movements at low loads. Due to the low thermal elongation and low moisture absorption, bearings can be manufactured with very low backlash. Applications in which these advantages play a role are fans, small motors, high-speed sensors or magnet technology.
Typical application areas
- Automotive
- Mechanical engineering
When should I use it?
- For high-speed rotation applications
- When maximum service life is required
- For high pv value at low loads
- For operating temperatures up to +250°C (permanent, short-term up to max. +350°C)
When should I not use it?
- If you are looking for a universal material for high temperatures
- If medium to high pressure loads occur
- For oscillating applications
Unsure if it fits?