- Part number: A181PFFM-0608-06
- Material: iglide® A181PF
- Form: Flange bearings
- Dimensions:
- d1 6 mm
- d2 8 mm
- d3 12 mm
- b1 6 mm
- b2 1 mm
- Customize dimensions
- Manufacturing method: Injection molding
- Service life:
PFAS-tested: All iglide materials labeled as "PFAS-tested" were tested for 96 PFAS substances considered critical for the environment and health. This category excludes substances from the group of fluoropolymers.
- PTFE-free
- The universal bearing material for contact with food
- FDA-compliant
iglide® A181PF | The universal bearing for food contact
iglide® A181PF offers both FDA and 10/2011 EC compliance. Its blue color also facilitates the "optical detectability" often required in the food industry. While directly comparable to iglide® A180 in terms of mechanical properties, temperature and media resistance, iglide® A181PF offers further improvements in wear resistance in most applications.
Typical application areas:
Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: the thicker the bearings are, the larger the tolerances must be.
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
