igus-icon-lupe
igus-icon-lupe
1 of 2
- non-metallic
- smooth running
- very little humidity absoption
- dirt resistant
igus-icon-lieferzeit-dotBB-16006-B180-10-GL
2.17 (55 mm)
0.35 (9 mm)
1.18 (30 mm)
16006
:
xiros® radial deep groove ball bearing, xirodur B180, glass balls, cage made of PA, mm
xirodur® B180 | The all-rounder
The widest range of plastic ball bearing applications is covered by xirodur® B180. This material is regarded as an all-rounder. In addition to its high wear resistance, the material offers good chemical resistance and medium temperature resistance. The mechanical properties are a good combination of certain hardness as well as elasticity. This variant is supplied in combination with a PA cage.
Typical applications:
- Automotive
- Packaging
- Roller bearing
Tolerances and measuring system:
The tolerances for inner and outer diameters depend on the size. These are often approx. ±0.05 mm to the nominal dimension. The bearing rings are usually injection molded and naturally exhibit a certain ovality. For this reason, the caliper gauge is used to measure 90° to the injection point (if present) over the entire width of the bearing. The dimensions and tolerances are designed to meet an easy press fit by hand when using a H7 mounting as well as shaft h6. Additional axial securing by means of a circlip (shaft) and snap ring (housing) is recommended to prevent axial displacement.
Mounting recommendation:
1. mounting (tolerance H7)
2. front side (balls visible)
3. rear side (cage visible)
4. press in ball bearing with front side first
5. mount shaft (tolerance h6) with chamfer
6. an axial safety device must be provided
Contact us
Questions or product information? Please contact:
Customer Service
Customer Service:
Phone: Monday to Friday from 8 am - 8 pm
LiveChat: 24 hours
LiveChat: 24 hours
Book a Call:
igus-icon-arrow-up