Series E2C.10 ESD

1 of 4

Inner height hi: 10.6mm
Inner widths Bi: 16 - 30mm
Bend radii R: 18 - 38mm
Pitch: 20mm
For permanent, maintenance-free conductivity
Strong: large, assembly- friendly pins
Quiet operation: integrated brake reduces noise
Tough: square stop-dog system for large fill weights

Item no.

E2C-10-16-018-0-ESD

Inner width [Bi] [in]

0.63 (16 mm)

Bending radius [R] [in]

0.71 (18 mm)

NEMA23: The best known stepper motor size

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads.

Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.

Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Certificates and standards

When to use it?

When a small e-chain® with 10mminner height and small pitch is required
For inner widths up to 30mm
When a large range of modular components is required
When long unsupported lengths and high fill weights in a small e-chain® are required
Quiet operation due to small pitch