drylin® E stepper motor, stranded wires with JST connector, NEMA23

MOT-AN-S-060-020-056-L-A-AAAA product image

MOT-AN-S-060-020-056-L-A-AAAA technical drawing

1 of 5

drylin® E stepper motor, stranded wires with JST connector, NEMA23

Installation size: NEMA23/flange installation size 56mm
Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
Holding torque: 2.00Nm
Nominal current: 4.20A
Motor connection: strands and encoder, JST connector

Item no.

MOT-AN-S-060-020-056-L-A-AAAA

NEMA23: The best known stepper motor size

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads.

Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.

Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.