igubal® pillow block bearings

igubal® pillow block bearings are particularly easy to install bearing units that compensate for misalignments and avoid edge pressure.The housing is made of igumid G, a particularly impact-resistant, long-fibre reinforced polymer. Suitable for temperatures from -30°C to +80°C in long-term use.

The spherical ball can be made of iglidur® J, J3 or A350 (FC).

• Extremely lightweight
• Extremely space-saving
• Cost-effective
• Predictable service life
• Maintenance-free and lubrication-free
• With M3 thread
• For self tapping screw with outer diameter 3.5mm

Typical applications

• Plant construction
• Automation
• Mechanical engineering
• Food industry
• Agriculture
  
  You can find many further application areas in our Industry solutions

 

When to use it? When chemical resistance is required If a cost-effective alternative is needed When dirt-resistant bearings are required If misalignments are to be compensated

When not to use it? If temperatures are higher than +80°C When an integrated fixing collar is required When dimensions above 10mm are required If rotation speeds of more than 0.5 m/s are to be achieved Use our filter options to find the suitable product

Application area

Since igubal® pillow block bearings are designed for maintenance-free dry operation, they are especially suitable for applications in which access to the bearing is limited, in moist or wet environments or cleanroom environments. The igubal® pillow block bearings are also found in electric brushes, awnings, conveyor technology, and bakery machines.

Installation

igubal® pillow block bearings are designed for installation with two screws. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors.
Special adjusting rings can be used to fix the shaft.