chainflex® bus cable CFBUS.LB
Typical application areas
- For heaviest duty applications
- Almost unlimited resistance to oil, also to bio-oils, Class 4
- Indoor and outdoor applications without direct sun radiation
- Unsupported travel distances and up to 400m and more for gliding applications, Class 6
- Bus connection cable for storage and retrieval equipment, machining units/machine tools, quick handling, cleanroom, semiconductor insertion, indoor cranes, low-temperature applications
Guaranteed service life for this series according to terms and conditions
More information: chainflex® guaranteeDouble strokes* | 5 million | 7,5 million | 10 million |
---|
Temperature, | CFBUS . 001 -. 049 | CFBUS . 050-. 070 | CFBUS . 001-. 049 | CFBUS . 050-. 070 | CFBUS . 001-. 049 | CFBUS . 050-. 070 |
from/to [°C] | R min. [Factor x d] | R min. [Factor x d] | R min. [Factor x d] | R min. [Factor x d] | R min. [Factor x d] | R min. [Factor x d] |
-35 / -25 | 12,5 | 10 | 13,5 | 11 | 14,5 | 12 |
-25 / +60 | 10 | 7,5 | 11 | 8,5 | 12 | 9,5 |
+60 / +70 | 12,5 | 10 | 13,5 | 11 | 14,5 | 12 |
* Higher number of double strokes possible - use the service life calculation function on this page.
Technical note on bus cables
chainflex® bus cables are specially developed and tested for continuous use in e-chain® applications. Depending on
the outer jacket material and the design principle, the bus cables are designed for different mechanical requirements
and media resistance.
The electrical design is selected in such a way that the electrical properties of the respective bus specification are reliably fulfilled
, and the greatest importance is also placed on high EMC safety. A permanent stability of the
electrical values despite permanent movement is also ensured.
However, the entire transmission property in a complete bus communication system is not exclusively
dependent on the cable used. Rather, it requires an exact coordination of all components (electronic components,
connection technology and cable) as well as the consideration of the maximum transmission rates which are dependent on the respective systems
in relation to the required data transmission rates. Therefore, a cable is not solely responsible for the reliable transmission of
signals.
igus® advises you when you are designing your bus system to take all these factors into account and, with its extensive tests, helps you to
ensure the process reliability of your system from the very beginning.
Certificates and standards