iglide® P210 | Specialist for pivoting, rolling applications and more - Good coefficients of friction and wear on almost every shaft
 

• Low humidity absorption
• Extremely wear resistant especially up to 2900 psi in pivoting applications
• Versatile: performance on many different shafts
• Good with edge loads
• Lubrication and maintenance-free
• Standard range from stock

iglide® P210 plain bearings provide the user with versatile all-round bearings, which have proven to have above average service life, primarily in pivoting applications at medium loads of up to 2900 psi. This versatile material has already proven its worth in many customer-specific solutions and as a bar stock material. Clip-on or pretensioned design as well as vehicle interior applications are possible.
 
Typical application areas

Automotive onboard and manufacturing
Fitness/physical therapy equipment

You will find plenty of additional application areas at our Industry solutions
 
 

When to use it? When you need a universal bearing for use in a moist environment When you need a wear-resistant bearing for pivoting applications at medium loads When edge loads and shocks occur When the surface pressure of iglide® J is insufficient

When not to use? When you need a universal bearing with the largest possible range of dimensions When you need a bearing for highly loaded pivoting applications If temperatures are higher than +212 °F   Use our filter options to find the most suitable product

Tolerances and measurement system
The installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglide® - assembling, gluing, machining